I actually don’t have the console table anymore and am to able to send the dimensions. We just figured it out by taking some measurements during the course of the build.

You could certainly add a drawer. It’s a little complicated to explain it, but rather than have a solid 1×4 stretcher across the front of the console, you would have a gap in the middle the desired width of your drawer. So you’d cut the length of your 1x4s and attach them to the 4×4 legs and in the middle, you would have a 1×4 running perpendicular to attach to the front edge and the back 1×4 stretcher. Do this on both sides and it would leave you with a space to add a drawer. Hopefully that helps! You can also search for DIY entry consoles and I’m certain there are designs similar that have instructions for a drawer.

Hi Kim! You can use a brush, cloth, or even a foam brush.