Comments on: Gaming Computer Desk – How To Build Your Own https://addicted2diy.com/gaming-computer-desk-how-to-build-your-own/?utm_source=rss&utm_medium=rss&utm_campaign=gaming-computer-desk-how-to-build-your-own Eat. Sleep. DIY. Tue, 24 Mar 2020 16:23:59 +0000 hourly 1 By: 25 Brilliant and Easy to Build DIY Computer Desks | Little Lovelies https://addicted2diy.com/gaming-computer-desk-how-to-build-your-own/#comment-136515 Tue, 24 Mar 2020 16:23:59 +0000 https://addicted2diy.com/?p=8620#comment-136515 […] Check the Idea […]

]]> By: How To Make A Wooden Headset Stand - Addicted 2 DIY https://addicted2diy.com/gaming-computer-desk-how-to-build-your-own/#comment-136003 Mon, 04 Nov 2019 14:58:16 +0000 https://addicted2diy.com/?p=8620#comment-136003 […] without the cord getting pinched. My oldest son loves it and couldn’t wait to put it on his gaming desk that I built him. I’ll be building one for my youngest as well, but his will also have a spot […]

]]> By: Addicted 2 DIY https://addicted2diy.com/gaming-computer-desk-how-to-build-your-own/#comment-135841 Tue, 15 Oct 2019 02:27:04 +0000 https://addicted2diy.com/?p=8620#comment-135841 In reply to Asiyah.

Yes. The groove would be 1/2” x 1/4”, so 1/4” deep for the plywood to sit flush inside the rabbet and 1/2” wide to allow the plywood to sit and have enough material to nail it down. When the cabinet is assembled, measure and cut the plywood to the size of the opening of the rabbet.

]]> By: Asiyah https://addicted2diy.com/gaming-computer-desk-how-to-build-your-own/#comment-135765 Sun, 06 Oct 2019 17:40:46 +0000 https://addicted2diy.com/?p=8620#comment-135765 Hi Katie. I’m working on these plans and I wondered about the rabbeting size for the plywood. Is it supposed to be 1/2 inch wide by 1/4 inch deep? Maybe my math is wrong but it seems like that groove would be too wide to accommodate the plywood. Thanks!

]]>